DISINFECTION IN GYMS
Today, there are thousands of people who use the facilities and equipment of a gym.
This poses a risk in the spread of viruses, such as coronavirus or bacteria and other pathogenic microorganisms.
The equipment and changing rooms are used several times a day by different people, with the possible risk of contamination.
Traditional cleaning systems are insufficient as they do not reach all surfaces correctly, in order to offer the customer the maximum guarantee in prevention.
Electrostatic spraying offers the best disinfection technique and with the lowest cost and application time.
Due to the number of people who travel daily, it is very important to focus on the disinfection of surfaces, such as equipment, handlebars, toilets, toilets, seats, screens, floors, doors, showers, and all kinds of equipment and furniture.
For this reason, TecnoStatic has developed a device that, in addition to offering all the features of an electrostatic sprayer, incorporates an external design that is homogeneous and integrates with the facilities. Anyone can use it and its handling is very simple. Available in the battery-powered version and with electrical connection.
How long does it take to disinfect a 500 m2 gym?
Including in the treatment all surfaces, walls, furniture, changing rooms, toilets, equipment, etc … it is 40/55 minutes.
How long do you have to wait to use the room once it has been disinfected?
Today there are disinfectants that, when applied with spraying systems, do not require a safety period, so the use of the room is immediate.
What benefits do we get?
- Savings of up to 65% of disinfectant product
- Quick application
- Savings in labor
- Better and greater scope in disinfection
- 360º surround capacity
- Immediate use of the facilities, without security periods
- Improves environmental quality and provides improvements with ISO 14001
- Significant cost savings
- Ability to penetrate hard-to-reach areas such as cracks, crevices, gratings
Undoubtedly the best technology is the application of disinfectants / biocides with electrostatic spraying. Getting bio-safe spaces.
Who can use our sprayers?
All TecnoStatic electrostatic sprayers can be used by anyone. You just have to have some basic and simple concepts that allow you to perform quick and effective disinfections, in less than 5 minutes you will handle the sprayer with dexterity and comfort, easier than with a traditional manual sprayer.
Do you want a demo? Contact us and we will do it without any commitment.
Cleaning is the same as disinfecting?
No. Cleaning is a process that is carried out to remove dirt deposited on a surface.
This process should always be done before the second phase, which will be disinfection.
Once we have thoroughly cleaned the surfaces, we will proceed to disinfection.
The better and more thorough we clean, the better results we will obtain with disinfection.
Disinfection is a process that through the use of biocidal / disinfectant products and application techniques, it is possible to reduce the microbial load of a surface or environment.
In this way we will achieve the best possible hygiene and disinfection results in any type of facility and sector. Eliminating all kinds of pathogenic microorganisms, such as bacteria, viruses, spores, fungi.
Remember: Cleaning and Disinfection are two DIFFERENT processes
WHAT IS THE BEST TECHNIQUE TO DISINFECT A SURFACE?
If we can avoid distributing the disinfectant with a cloth, the better. why? In this way we will avoid causing possible cross contamination.
This means that we will not spread microorganisms from one area to another.
Therefore, it is important to apply disinfectants with techniques that avoid contact with the surface, such as electrostatic spraying.
In this case, the best technique is the application of biocides / disinfectants with electrostatic sprays.
This technology allows to apply the disinfectant / biocide leaving a thin layer on it, uniform and with a total coverage, 360º enveloping, without the need to distribute the product manually and make contact with the surface.
It can even be applied to electronic equipment and has the ability to penetrate areas where it cannot be done manually.
Our high-performance professional teams
Unbeatable prices, factory direct
Click on the image for more information about the equipment
Do you want to know more?
Contact us and we will inform you of the equipment that will help you improve and save in your company or business.