DISINFECTION IN HOSPITALS
The hospital sector has suffered in the first line the consequences of the pandemic caused by the Coronavirus.
If before the pandemic hospitals had outstanding hygiene and cleanliness standards, if possible now, disinfection measures must be taken to extremes and prevent the spread in their facilities to their staff and patients, adapting and incorporating disinfection systems that minimize and guarantee in as much as possible sources of contamination in your facilities with the best disinfection treatment and that transmits the greatest tranquility in the rooms of your facilities.
Due to the traffic of people who daily pass and occupy its facilities, it is very important to focus on the disinfection of surfaces, such as in common areas, elevators, entrance hall, rooms, corridors, toilets, operating rooms and all the furniture and equipment in the different stays.
For this reason, TecnoStatic has developed an equipment that, in addition to offering all the features of an electrostatic sprayer, incorporates a homogeneous and integrating external design with the facilities. Anyone can use it and its handling is very simple. Available in the battery-powered version and with electrical connection.
HOW LONG DOES IT TAKE TO DISINFECT A ROOM OR AN OPERATING ROOM OF ABOUT 40 M2?
A room or operating rooms of 40 m2, including in the treatment all surfaces, walls, ceilings, floors, doors, furniture, electronic equipment such as TV screens, remote controls, toilets, toilets, etc. .. the time is 3/6 minutes.
How long do you have to wait to use the room once it has been disinfected?
Today there are disinfectants that, when applied with spraying systems, do not require a safety period, so the use of the room is immediate.
What benefits do we get?
- Savings of up to 65% of disinfectant product
- Quick application
- Savings in labor
- Better and greater scope in disinfection
- 360º surround capacity
- Immediate use of the facilities, without security periods
- Improves environmental quality and provides improvements with ISO 14001
- Significant cost savings
- Ability to penetrate hard-to-reach areas such as cracks, crevices, gratings
Undoubtedly the best technology is the application of disinfectants / biocides with electrostatic spraying. Getting bio-safe spaces.
WHO CAN USE OUR SPRAYERS?
All TecnoStatic electrostatic sprayers can be used by anyone. You just have to have some basic and simple concepts that allow you to perform quick and effective disinfections, in less than 5 minutes you will handle the sprayer with dexterity and comfort, easier than with a traditional manual sprayer.
DO YOU WANT A DEMO? CONTACT US AND WE WILL DO IT WITHOUT ANY COMMITMENT.
CLEANING IS THE SAME AS DISINFECTING?
No. Cleaning is a process that is carried out to remove dirt deposited on a surface.
This process should always be done before the second phase, which will be disinfection.
Once we have thoroughly cleaned the surfaces, we will proceed to disinfection.
The better and more thorough we clean, the better results we will obtain with disinfection..
Disinfection is a process that through the use of biocidal / disinfectant products and application techniques, it is possible to reduce the microbial load of a surface or environment.
In this way we will achieve the best possible hygiene and disinfection results in any type of facility and sector. Eliminating all kinds of pathogenic microorganisms, such as bacteria, viruses, spores, fungi.
REMEMBER: CLEANING AND DISINFECTION ARE TWO DIFFERENT PROCESSES
WHAT IS THE BEST TECHNIQUE TO DISINFECT A SURFACE?
If we can avoid distributing the disinfectant with a cloth, the better. why? In this way we will avoid causing possible cross contamination.
This means that we will not spread microorganisms from one area to another.
Therefore, it is important to apply disinfectants with techniques that avoid contact with the surface, such as electrostatic spraying.
In this case, the best technique is the application of biocides / disinfectants with electrostatic sprays.
This technology allows to apply the disinfectant / biocide leaving a thin layer on it, uniform and with a total coverage, 360º enveloping, without the need to distribute the product manually and make contact with the surface.
It can even be applied to electronic equipment and has the ability to penetrate areas where it cannot be done manually.
OUR HIGH-PERFORMANCE PROFESSIONAL TEAMS
UNBEATABLE PRICES, FACTORY DIRECT
Click on the image for more information about the equipment
Do you want to know more?
Contact us and we will inform you of the equipment that will help you improve and save in your company or business.